A battery monitor with Bluetooth built-in. As Bluetooth is implemented in most other Victron Energy products, wireless communication between products simplifies system installation and enhances performance.
The battery monitor contains midpoint voltage monitoring. One bad cell or bad battery can destroy a large, expensive battery bank - when batteries are connected in series, a timely warning can be generated by measuring the midpoint voltage. In addition, the monitor offers very low current draw from the battery.
All electrical connections are to the quick connect PCV on the current shunt. The shunt connects to the monitor with a standard RJ12 telephone cable. A 10 metre RJ12 cable and 2 metre battery cable with fuse are included, no other components are required. Also included are a separate front bezel for a square or round display appearance, a securing ring for the rear mounting and screws for the front mounting.
Victron Bluetooth App:
Use the smartphone or Bluetooth enabled device to:
- Customise settings.
- Monitor all important data on single screen.
- Update the software when new features become available.
- View historical data.
Key Features:
500 amp quick connect shunt and connection kit.
Additional input to measure voltage of a second battery, temperature or midpoint voltage, and corresponding alarm and relay settings.
Battery voltage, current, power, ampere-hours consumed and state of charge.
Bi-stable alarm relay prevents increased current draw in case of an alarm.
High current measurement resolution: 10mA (0.01A).
Programmable relay to turn off non-critical loads, or to run a generator when needed.
Programmable visual and audible alarm.
Remaining time at the current rate of discharge.
Shunt selection capability up to 10,000 amps.
Stores a wide range of historical events, which can be used to evaluae usage patterns and battery health.
VE direction communication port.
Wide input voltage range: 6.5-70V.
Specifications:
Supply Voltage Range: 6.5-70 VDC.
Current Draw (Back Light Off): < 1 mA.
Input Voltage Range (Auxiliary Battery): 6.5-70 VDC.
Battery Capacity (Ah): 1-9999 Ah.
Operating Temperature Range: -40C to +50C.
Temperature Measurement Range: -20C to +50C.
VE Direct Communication port: Yes.
Bistable Relay: 60V/1A normally open (function can be inverted).
Resolution & Accuracy (with a 500A shunt)
Current: ñ 0.01A.
Voltage: ñ0.01V.
Amp Hours: ñ0.1 Ah.
State of Charge (0-100%): ñ0.1%.
Time To Go: ñ 1 min.
Temperature (0-50C): ñ1C/F.
Accuracy of Current Measurement: ñ0.4%.
Accuracy of Voltage Measurement: ñ0.3%.
Installation & Dimensions:
Installation: Flush mount.
Front: 63mm diameter.
Front Bezel: 69 x 69mm.
Shunt Connection Bolts: M10.
Body Diameter & Depth: 52mm and 31mm.
Protection Category: IP55 (not intended for outdoor use).
Standards:
Safety: EN 60335-1.
Emission/Immunity: EN 55014-1 / EN 55014-2.
Automotive: ECE R10-4 / EN 50498.
Accessories:
Shunt (included): 500A / 50mV.
Cables (included): 10 metre 6 core UTP with RJ12 connectors, and cable with 1 amp slow blow fuse for '+' connection.
Stored Trends:
Data Stored: Battery voltage, current, stage of charge % as well as the aux input (battery temperature or midpoint deviation, or starter battery voltage).
Number of days trends data is stored: 46.