Seajet’s Peller Clean is an advanced and environmentally friendly foul release product which contains an epoxy primer base coat and silicone top coat.
Peller Clean contains no metals, making it suitable for all propellers and stern drives. The Seajet antifoul provides long term protection on shafts, rudders, struts, trim tabs and props against fouling in both fresh and salt water.
We've written up a few frequently asked questions that are asked in store for a little extra guidance.
How can Seajet Peller Clean Antifoul be applied?
Application is via brush or roller.
What is Peller Clean antifoul coverage?
One pack will cover approximately 1 metre square.
How many coats of Seajet Peller Clean should I apply?
Two coats will offer up to three seasons of protection.
At what temperature can Seajet Peller Clean antifoul be applied?
Between 5C and 30C.
How long does Peller Clean antifoul take to become hard dry?
5C – 10 hours, 10C – 7 hours, 20C –5 hours, 30C – 4 hours
How long should I wait in-between coats when applying Peller Clean?
5C – 10 hours, 10C – 7 hours, 20C –5 hours, 30C – 4 hours. There is a maximum time limit of 5 days at all temperatures.
What speed of boat is Seajet Peller Clean recommended for?
Boats that do not exceed speeds of 30 knots.
Useful Links:
- Margin:
- 20-25
