An electric, submersible non-automatic bilge pump with a high efficiency, low amp motor and stainless steel motor shaft. A new, innovative split quick-connect joint design removes and installs in seconds, with no need to disconnect the base or plumbing when replacing the pump.
There are hidden air vents in the body of the bilge pump that help prevent air locking in challenging plumbing installations, and helps with the check valve. There's also a threaded discharge that makes installation and maintenance easier.
Key Features:
Drain threaded hose adaptors.
Exclusive moisture tight seals.
High efficiency, low amp motor.
Includes check valve to prevent water back flow.
Includes removable discharge straight fitting.
Marine grade silicon blocked, tin coated wiring.
Modular design that's easy to dissemble, clean snap lock strainer and replace accessories.
Motor can be replaced separately.
Quiet operation.
Sealed, efficient, long life motors.
Submersible and ignition protected.
Specifications:
| Output | 600 GPH | 800 GPH | 1100 GPH | 1500 GPH |
| Voltage | 12V | 12V | 12V | 12V |
| Current | 2.5A | 3.5A | 4A | 4.5A |
| Head | 7.5ft (2.5m) | 9ft (3m) | 9ft (3m) | 16.4ft (5m) |
| Wire Lead | 3ft (1m) | 3ft (1m) | 3ft (1m) | 3ft (1m) |
| Outlet Diameter | 3/4" (19mm) | 3/4" (19mm) | 1" (25mm) | 1-1/8" (29mm) |
| Weight | 0.47kg | 0.47kg | 0.47kg | 0.75kg |
Useful Links:
Read our bilge pump selection guide.
Explore our full range of electric bilge pumps.
