A light, compact bilge pump suitable for small vessels. The electric bilge pump has a tough, plastic body that is vented to prevent air locking. A quick release inlet strainer allows rapid cleaning, and there's also a check valve for back flow prevention.
The base is not interchangeable with the old range, but can be fitted to existing screw holes. There's also a built-in thermal cut off and low amp draw that conserves the batteries. The port is threaded for easier installation and maintenance. For automatic operation, use Rule Float Switches.
Also available in a bundle with 35A float switch:
Rule 360 12V Submersible Bilge Pump w/ 35A Float Switch.
Key Features:
Built-in thermal cut off motor with a 1500 hour life.
Check valve for back flow prevention.
Compact pump for smaller vessels.
Low amp draw conserves batteries.
Quick release inlet strainer allows rapid cleaning.
Threaded port for easier installation and maintenance.
Tough plastic body.
Vented body to prevent air locking.
Specifications:
| Model | 24DA | 25DA | 20DA | 27DA |
| Output | 360GPH | 500GPH | 800GPH | 1100GPH |
| Connections | 19mm (3/4") bore hose | 25mm (1") and 28mm (1 1/8") bore hose | ||
| Current Draw | 2.1 amps | 1.6 amps | 3.4 amps | 3.7 amps |
| Dimensions | 99 x 64 x 74mm | 111 x 64 x 74mm | ||
| Fuse Size | 2.5 amps | 4 amps | 5 amps | 6 amps |
| Max. Recommended Discharge Head | 2m | |||
| Output (without check valve) | Up to 23 litres per minute. | Up to 31 litres per minute. | Up to 50 litres per minute. | Up to 69 litres per minute. |
| Weight | 0.41kg | |||
Useful Links:
Read our bilge pump selection guide.
