This fully automated bilge pump with computerised operation features a built-in thermal cut-off, check valve for back flow prevention and a vented body to prevent air locking. With the fully automatic bilge pump, there is no need for a separate float switch, as there is a third wire for a manual override.

A threaded port makes installation a breeze, whilst the quick release strainer ensures the bilge pump can be cleaned quickly. The automatic pump is constructed from a tough plastic with integral strainer. Low amp draw conserves batteries. Checks for water every two and a half minutes.

Specifications:

Connections: For 19mm (3/4") bore hose.
Dimensions: 107mm x 64mm x 74mm.
Current Draw: 1.6A.
Fuse Size: 4A.
Output: Up to 31 litres/minute (7 gallons/minute) at 12v, without check valve.
Maximum Recommended Discharge Head: 2m.
Consumes just 0.20 amps per day.
Weight: 0.41kg.

Useful Links:

Read our bilge pump selection guide.
Explore our full range of electric bilge pumps.