Raymarine's iTC-5 converts analogue transducer signals used in 70, ST70 and ST70+ instrument systems to SeaTalk. Transducers for speed/temperature, depth, wind and rudder angle can be connected to a single iTC-5 unit, eradicating the need for multiple ST70 pods.

Key Features:

Extended SeaTalkNG systems can support multiple iTC-5 units.
SeaTalkNG connections at the base of the unit simply connect the iTC-5 unit into the SeaTalkNG backbone.

Please Note:
The ST40/i40/i50/i60 and ST60+ displays cannot calibrate the iTC-5. Only the i70 has full transducer calibration. The ST70/ST70+ can calibrate the Depth, Wind and Speed/Temp transducers (not Rudder or Compass). If you don't have an ST70/ST70+ or i70 in your system, then the ST40/i40/i50/i60/ST60+ displays must be interfaced directly to the relevant analogue transducers.

What's In The Box?

iTC-5.
2 x Fixing Screws.
Documentation.
400mm SeaTalkNG spur cable.

Technical Specifications:

Power:
Power consumption: Typical: 1.5 W.
Operating voltage range: 9 - 16 V dc.
Nominal supply voltage: 12 V dc.
Current: < 150 mA peak operating current.
LEN (NMEA 2000 Load Equivalency Number): 3.

Data Connections:
Connections: SeaTalkng backbone, 1 x SeaTalkng spur, 5 x transducer connections with spade terminals.

Environmental:
Relative humidity: Max. 95%.
Splash proof: IPx2.
Storage temperature: -25° C to +70° C.
Operating temperature: -15° C to +55° C.