A complete Raymarine autopilot solution designed for tiller-steered sailboats. Designed for DIY installations, EV-100's externally mounted drive mounts in the cockpit, attached directly to the tiller.

The tiller pilot delivers precision autopilot control using the intelligent EV-1 sensor core and the ACU-100 actuator control unit.  EV-100 Tiller Pilot systems are available with Raymarine's P70S autopilot control head, or you can choose a system without a control head and use a Raymarine Axiom chartplotter for full autopilot control.

Key Features:

Designed for cockpit installations.
No complicated setup or autopilot calibration required.
Rated for tiller-steered sailboats up to 6,000kg displacement.
SeaTalkNG/NMEA2000 for networking with sailing instruments and chartplotters.
Tiller drive unit can be easily removed and stored.

What's In The Box?

1. ACU unit.
2. Documentation.
3. Screws (pan head type).
4. SeaTalkng spur to bare wires cable 1 m (3.3 ft).

Technical Specifications:

Physical:
Dimensions (H x W x D): 140 x 180 x 52mm.

Power:
Power Consumption (standby): 300 mA (12V).
Nominal Supply Voltage: 12V dc.
Operating Voltage Range: 10.8V dc to 15.6V dc.
LEN (NMEA 2000 Load Equivalency Number): 1.

Environmental:
Relative humidity: Max. 93%.
Waterproof Rating: Connector Panel: IPx2, Drive electronics: IPx6.
Storage Temperature: -30C to +70C.
Operating Temperature: -20C to +55C.

Output:
Drive Current Output: Maximum continuous 7A at supply voltage.