A fixed mount battery charger that is fully sealed in an epoxy-filled, non-corrosive enclosure, and built to IP68 waterproofing standards, ensuring it easily meets global regulations like CE, CSA, CEC, and ABYC. The outputs are completely isolated and can be used in either series or parallel for higher voltage or current, including 12 or 24V outputs. Highly efficient and simple to use, EasyCharge is built to withstand harsh environments, which is why it is fully salt, shock and vibration tested.

A key feature of the battery charger is the ‘sense and send’ technology, which enables EasyCharge to detect which batteries need the most charge, so it can then prioritise accordingly. EasyCharge has the ability to charge wet, AGM and gel batteries, with a universal input (120-230V) for total worldwide freedom.

Key Features:

Can charge one or two battery banks.
Full power up to 40C.
International certification.
Quick charging function to extend battery life.
Sense send determines which battery is being charged first.
Stain resistant and waterproof.
Suitable for charging Gel, AGM and Flooded batteries.

General Specifications:

Total Charge Current: 10A at 12V/5A at 24V.
Recommended Battery Capacity - Charge (Based on 50% discharged battery): to 120Ah.
Nominal Input Voltage: 120/230V (90-265V), 50/60Hz.
AC Connection: 1.2m (4ft) cable + euro plug.
DC Connection: Ring terminals.
Galvanic Isolation: Yes.
Weight: 2.8kg (6.2lb).
Compliance: CE, ABYC.

Technical Specifications:

Charge Characteristic: IUoUo, automatic 3-step+ for Gel/AGM/Flooded.
Temperature Range (ambient temp): -20C to 50C.
Protection Degree: IP68.
Protections: Spark free, short circuit, reverse polarity, over voltage, current limited, over temperature.