A genuine Johnson nitrile flexible impeller that is suitable for applications where diesel or light oils are present. The impeller has twelve blades and is supplied with lubrication gel and an instruction manual that will help you install the impeller to the flexible impeller pump.

The Johnson impeller can be used to replace the Jabsco 17937-0003 and 920-0003 Europe and USA flexible impellers. For water-pumping applications, use Johnson neoprene impeller 09-1028B.

It's highly recommended that you use an original pump impeller for your flexible impeller pump, as this will ensure that the quality complies with the performance and dimension requirements for each pump type. Johnson Pump impellers are manufactured in strict compliance with the pump specifications set by the engine manufacturers.

The pump impeller is designed to be installed to some of the F7 range of Johnson Pumps, which suits the impeller dimensions listed at the bottom of this page, including:

F7B-39, F7B-393, F7B-3900, F7B-3920, F7B-3930, F7B-39007, F7B-39207 and F7B-39307 pump models: 10-22045-2, 10-22045-4, 10-24209-2, 10-24209-6, 10-24209-4, 10-24209-8, 10-24209-12 & 10-24209-10.

F7B-89, F7B-893, F7B-8907 and F7B-8937 pump models: 10-24070-2, 10-24070-4, 10-24070-6 & 10-24070-8.

Technical Specifications:

Material: Nitrile.
Impeller Shaft Diameter: 16mm.
Drive Type: Spline drive.
Depth: 50.2mm.
Diameter: 65mm, Shaft: 16mm.