The ultimate in varnish performance, International's Perfect Plus two-part polyurethane yacht varnish combines excellent chemical and abrasion resistance with superb gloss. The formula contains UV filters to give it the longest possible life.
International Perfection Plus will last up to four times longer than a conventional one-part varnish. Professional results are easy thanks to the varnishes’ simple application and 2:1 mix ratio which makes it easy to measure and mix. The gloss varnish also contains a chemical cure which gives resistance to fuels, oil and mild acids and alkalis.
We've written up a few frequently asked questions that are asked in store for a little extra guidance.
How can Perfection Plus be applied?
It can be applied with a brush, paint roller. It is strongly advised that you do not use a spray. 2-5 coats are recommended.
How long should I wait in-between coats?
If applied at 10C – Minimum of 24 hours, maximum of 4 days.
15C – Minimum of 14 hours, maximum of 3 days.
23C – Minimum of 6 hours, maximum of 2 days.
30C – Minimum of 4 hours, maximum of 24 hours.
How long does the formula take to become touch dry?
If applied at 10C – 10 hours.
15C – 7 hours.
23C – 4 hours.
35C – 3 hours.
How long does Perfection Plus take to become hard dry?
If applied at 10C – 24 hours.
15C – 24 hours.
23C – 16 hours.
35C – 12 hours.
What is Perfection Plus Varnish coverage?
Approximately 12 metres square per litre.
At what temperature can the formula be applied?
It is recommended that the varnish is applied with the temperature between 10C and 35C.
What type of wood is Perfection Plus suitable for?
The varnish is fully compatible with oily woods like teak and iroko after adequate degreasing and substrate preparation. Do not apply two part varnishes over one part varnishes.
Other Notes:
High gloss finish. Do not apply late in the evening as condensation can cause a loss of gloss. This product is suitable for both internal and external use.
Useful Links:
International Perfection Plus Varnish Product Data Sheet.
