This quick-drying polyurethane varnish from International is designed primarily for interior use. The tough, abrasive formula is resistant to UV, hot water, mild acids and alkalis. Thanks to its fast drying capabilities, dust contamination is minimised. A minimum of three coats are recommended and once application is complete you’ll see a satin finish.
FAQ's -
How can Goldpsar Satin Varnish be applied?
It can be applied with a brush, paint roller, airmix, airless spray or conventional spray although it is recommended that application via airmix, airless spray or conventional spray is only done by professionals. A minimum of three coats are recommended.
How long should I wait in-between coats?
If applied at 10C – Minimum of 24 hours, maximum of 4 days.
15C – Minimum of 15 hours, maximum of 3 days.
23C – Minimum of 6 hours, maximum of 2 days.
30C – Minimum of 3 hours, maximum of 24 hours.
How long does Goldspar Varnish take to become touch dry?
If applied at 5C – 5 hours.
15C – 3 hours.
23C – 60 minutes.
35C – 30 mins.
What is Satin Varnish's coverage?
Approximately 10.3 metres square per litre.
At what temperature can the formula be applied?
It is recommended that the primer is applied with the temperature between 5C and 35C.
What type of wood is Goldpsar Varnish suitable for?
All types of wood except direct application on oily timbers such as Teak and Iroko.
Other notes:
Satin finish. Quick drying to minimise dust contamination. For interior use only.
Useful Links:
- Margin:
- 40-50
