A compact black box fixed VHF radio that can be installed out of sight, providing a clean and uncluttered appearance on the helm. IC-M410BB has a modular design that offers versatile installation options, so can be easily integrated into a wide range of vessels including yachts, powerboats and commercial vessels.

A standout feature of the Icom VHF radio is the multi-station control feature. With the optional HM-195GB command mic, you're able to control up to three independent stations. This allows for convenient communication from multiple locations on the vessel, thus improving operational efficiency and ensuring seamless coordination among the crew.

To ensure compatibility with existing onboard systems, the marine VHF radio supports NMEA 2000 and NMEA 018-HS connectivity, enabling seamless integration with navigation equipment and other marine electronics.

Key Features:

Active noise canceling technology.
AquaQuake function.
Anchor Watch function.
Built-in 13W amplifier increases the audio output to an external hailer speaker. The 1-way RX hailer function enables you to keep watch of the radio traffic on deck or tower through the hailer speaker. You can also sound foghorn patterns from the hailer speaker.
Built-in Class D DSC distress button - digitally transmit distress information to the coast guard and/or other vessels. For added safety and security, the DSC function continuously monitors the DSC channel (70).
Clean installation for limited helm space.
Dedicated DSC remote control (EN 300 338-8 compatible) terminal, allowing connection to PC console software or external device. You'll also be able to centralize emergency communications control.
Install up to three stations on board.
Integrated AIS receiver helps you find ships heading towards your boat, and gives you an alert for collision avoidance. You're also able to make an individual DSC call to select a ship from the AIS screens.
Integrated GPS receiver.
IPX7 waterproof - 1m depth water for 30 minutes.
Last call voice recording function automatically saves up to two minutes of an incoming call, so you won't miss incoming messages.
NMEA 2000 network provides plug-and-play data communication to inter-connect with other marine equipment such as an MFD. The radio can send GNSS (GPS) position, AIS, DSC call, and radio channel to other equipment.

Technical Specifications:

General:
Frequency Range: TX: 156.025~161.425 MHz / RX: 156.050~162.000 MHz /ÀšÃ‚  DSC: 156.525 MHz / AIS1, 2: 161.975, 162.025 MHz.
Usable Channels: INT, USA, ATIS channels.
Type Of Emission: 16K0G3E (FM), 160K0G2B (DSC), 16K0G2GB (AIS).
Power Supply Requirement: 12.0 V DC (10.8~15.6 V DC).
Current Drain (at 13.8V DC): TX 25W Output: 5.5A max. RAX Max audio: 1.5A (One CommandMic) / 4.5A (Three CommandMic & RX Hailer).
Operating Temperature Range: ۉ‚¬Å“20ÀšÃ‚°C ~ +60ÀšÃ‚°C; ۉ‚¬Å“4ÀšÃ‚°F ~ +140ÀšÃ‚°F.
Antenna Impedance: 50 Ω.
Dimensions (W x H x D): RF Unit: 216 x 79 x 113mm / CommandMic: 67.5 x 144.5 x 37mm.
Weight: RF Unit: 890g / CommandMic: 400g.

Transmitter:
Output Power: 25W, 1W.
Max Frequency Deviation: ÀšÃ‚±5 kHz.
Frequency Tolerance: ÀšÃ‚±0.5 kHz
Spurious Emissions: Less than 0.25 μW.
Residual Modulation: More than 40 dB.
Adjacent Channel Power: More than 70 dB.

Receiver:
Sensitivity: Less than -2 dBμ emf (at 20 dB SINAD).
Adjacent Channel Selectivity: FM: More than 70 dB / DSC (1% BER): More than 73 dBμ emf.
Spurious Response: FM: More than 70 dB / DSC (1% BER): More than 73 dBμ emf.
Intermodulation: FM: More than 68 dB / DSC (1% BER): More than 68 dBμ emf.
Hum & Noise: More than 40dB.
Audio Output Power: Command Mic: More than 2 W (with 4 Ω load, at 10% distortion) / RX Hailer: More than 13 W (with 4 Ω load).

Applicable IP Rating:
IC-M510BB: IPX7.

Supplied Accessories:
Commandmic, HM-195GB.
Connection cable OPC-1540 (6.1 m, 20 ft).
GPS antenna.
Microphone hanger.
DC power cable.
Mounting base.
Connector cap.

Comparison: