A compact black box fixed VHF radio that can be installed out of sight, providing a clean and uncluttered appearance on the helm. IC-M410BB has a modular design that offers versatile installation options, so can be easily integrated into a wide range of vessels including yachts, powerboats and commercial vessels.
A standout feature of the Icom VHF radio is the multi-station control feature. With the optional HM-195GB command mic, you're able to control up to two independent stations. This allows for convenient communication from multiple locations on the vessel, thus improving operational efficiency and ensuring seamless coordination among the crew.
To ensure compatibility with existing onboard systems, the marine VHF radio supports NMEA 2000 and NMEA 018-HS connectivity, enabling seamless integration with navigation equipment and other marine electronics.
Key Features:
Active noise cancelling - no need to shout into your microphone.
AquaQuake function.
Built-in 13W amplifier increases the audio output to an external hailer speaker. The 1-way RX hailer function enables you to keep watch of the radio traffic on deck or tower through the hailer speaker. You can also sound foghorn patterns from the hailer speaker.
Built-in Class D DSC distress button - digitally transmit distress information to the coast guard and/or other vessels. For added safety and security, the DSC function continuously monitors the DSC channel (70).
Clean installation for limited helm space.
External GPS antenna.
External speaker connection from the CommandMic cable.
IPX7 waterproof - 1 metre depth water for 30 minutes.
NMEA 2000 and NMEA 0183-HS provides data integration on your boat.
Install up to two stations on board.
Technical Specifications:
General:
Frequency Range: TX: 156.025~161.425 MHz, RX: 156.050~162.000 MHz, DSC: 156.525 MHz.
Usable Channels: INT, USA, ATIS channels.
Type Of Emission: 16K0G3E (FM), 160K0G2B (DSC).
Power Supply Requirement: 12.0 V DC (10.8~15.6 V DC).
Current Drain (at 13.8V DC): TX 25W Output: 5.5A max. RAX Max audio: 1.5A (One CommandMic) / 4.0A (Two CommandMic & RX Hailer).
Operating Temperature Range: ââ¬Ã¢¬Å20ÃðC ~ +60ÃðC; ââ¬Ã¢¬Å4ÃðF ~ +140ÃðF.
Antenna Impedance: 50 ÃŽé.
Dimensions (W x H x D): RF Unit: 216 x 79 x 113mm / CommandMic: 67.5 x 144.5 x 37mm.
Weight: RF Unit: 870g / CommandMic: 400g.
Transmitter:
Output Power: 25W, 1W.
Max Frequency Deviation: Ãñ5 kHz.
Frequency Tolerance: Ãñ0.5 kHz
Spurious Emissions: Less than 0.25 ÃŽüW.
Residual Modulation: More than 40 dB.
Adjacent Channel Power: More than 70 dB.
Receiver:
Sensitivity: Less than -2 dBÃŽü emf (at 20 dB SINAD).
Adjacent Channel Selectivity: FM: More than 70 dB / DSC (1% BER): More than 73 dBÃŽü emf.
Spurious Response: FM: More than 70 dB / DSC (1% BER): More than 73 dBÃŽü emf.
Intermodulation: FM: More than 68 dB / DSC (1% BER): More than 68 dBÃŽü emf.
Hum & Noise: More than 40dB.
Audio Output Power: Command Mic: More than 2 W (with 4 ÃŽé load, at 10% distortion) / RX Hailer: More than 13 W (with 4 ÃŽé load).
Applicable IP Rating:
IC-M410BB: IPX7.
Supplied Accessories:
Commandmic, HM-195GB.
Connection cable OPC-1540 (6.1 m, 20 ft).
GPS antenna.
Microphone hanger.
DC power cable.
Mounting base.
Connector cap.
Comparison:
| ÃÃ | IC-M410BB | IC-M510BB |
| CommandMic Stations | Total 2 stations (optional 1 station) | Total 3 stations (optional 2 station) |
| Intercom Function | Yes | Yes (one-to-one and one-to-all) |
| Class D DSC & Distress | Yes | Yes |
| AIS Receiver | No | Yes |
| Integrated GPS (GNSS) Receiver | Yes | Yes |
| Active Noise Cancelling | Yes | Yes |
| Voice Recording & Playback | No | Yes |
| NMEA Interface | NMEA 2000, NMEA 0183-HS | NMEA 2000, NMEA 0183-HS |
| DSC Remote Control Interface | No | Yes (EN 300 338-8) |
| RX Hailer & Foghorn | Yes (1-Way) | Yes (1-Way) |
