Hempel's Eco Powerprop is ideal as a coating for propellers, out-drives and stern gear.
Once applied, the coating will make it difficult for fouling to fully attach, therefore making it easy to dislodge and remove when cleaning.
COLOUR OPTIONS
We've written up a few frequently asked questions that are asked in store for a little extra guidance.Ã
How do I apply Hempel Eco Power Prop?
Application is via a spray can. Hold the can in a vertical position and shake vigorously until you can hear the agitator ball, then shake for a further two minutes. Spray approximately 20-30cm away from the surface and continue to shake during application.
How many coats of Eco Power Prop are recommended?
A minimum of four coats are recommended, these coats should be 25 micron dry film thickness each. Do not apply in direct sunlight.
How long should I wait in between coats when applying Hempel Eco Power Prop?
A minimum of 40 minutes if applied at 20C, 60 minutes at 10C.
What is Hempel Eco Power Prop coverage?
1.3 metres square per litre.
What is the length between application and launch when applying Hempel Eco Power Prop?
It's recommended that you wait a minimum of 24 hours with a maximum of 1Ã month if applied at 20C.
Useful Links:
Hempel Antifoul Guide
Hempel Eco Power Propà Product Data Sheet
