An uncomplicated way to link between a boat's data networks, converting NMEA 0183 data into NMEA 2000 data and vice versa. Multiple gateway units can be used to multiplex numerous NMEA 0183 devices onto the NMEA 2000 network, using the network as a means of combining and transferring all data from one place to another.

Key Features:

Advanced configuration using Actisense Toolkit allows Tx / Rx lists and Tx rates to be set.
Diagnostic receive LEDs.
Fully isolated NMEA 0183 incorporating ISO-Drive„¢ technology.
Integrated 1.5m drop cable.
Supports Fast Heading at 10Hz.
Up to 230,400 baud data transfer rate.

Benefits:

Allow NMEA 0183 devices to receive vital NMEA 2000 data.
Easily configurable using Actisense Toolkit.
Reliable, renowned bi-directional conversion engine.
Supports a wide range of conversions including AIS.
Upgrade NMEA 0183 equipment to NMEA 2000.
Use the NMEA 2000 bus to multiplex several NMEA 0183 signals together.

Specifications:

Power Supply (ISO, ISO-AIS & STNG Variants)
Supply Voltage (NMEA 2000 Port): 9.5 to 35V DC.
Supply Current (NMEA 2000 Port): 35mA @ 12V DC, Max 50mA.
Load Equivalent Number (LEN): 1.

NMEA 2000 Port (All Variants)
Compatibility: Fully NMEA 2000 certified.
Speed / Baud Rate: 250kbps.
Connectivity: M12 Male (A polarised) connector moulded on cable.
Cable Length NMEA 2000: 1.5m.
Cable Length STNG Adapter: 0.4m (1.9m with NMEA 2000 cable connected).

ISO Port (NMEA 0183 port €€œ ISO, ISO-AIS & STNG Variants)
Compatibility: Full NMEA 0183, RS232 & RS422 compatible. RS485 Listener compatible.
Speed/Baud Rate: 4800 to 115200 Baud.
Output Voltage Drive: >= 2.1V (differential) into 100Ω.
Output Current Drive: 20mA max.
Output Protection: Short circuit and ESD.
Input Voltage Tolerance: -15V to +15V continuous -35V to +35V short term (< 1 second).
Input Protection: Current limited and overdrive protection to 40VDC.
Connectivity: 5mm stripped and tinned wire.
Cable Length: 1.5m.

Isolation
NMEA 2000 Port to ISO Port: Uses IsoDriveTM, Hi-Pot tested to 1000V.

Mechanical
Housing Material Lid: Polycarbonate.
Housing Material Base: Flame retardant ABS.
Weight: 260g.

Approvals and Certifications
Fully NMEA 2000 Certified
Meets all IEC 61162-1 & 61162-2 requirements
Meets all IEC 61162-3 requirements
EMC: IEC 60945 (sections 9, 10 & 11.2).
Environmental Protection: IP42.
Operating Temperature: -20°C to +55°C.
Storage Temperature: -30°C to +70°C.
Recommended Humidity: 0 €€œ 93% RH.
Guarantee: 3 years.